House Washing & Soft Washing
Zach's Pressure Washing LLC washes the outside of homes across Alabama. Siding, brick, trim and soffits come clean of the dirt, pollen, mildew and algae that Alabama humidity leaves behind, with a low-pressure soft wash for paint and vinyl and the pressure set for every other surface.
- Open 24 hours · 7 days
- Free, no-obligation quotes
- Siding, brick, trim & soffits
What is house washing, and when does an Alabama home need one?
House washing is an exterior cleaning of a home's walls and trim that removes the dirt and growth rain won't. A home here needs one when green or black film shows on the shady walls, or when pollen and dust have dulled the paint and siding.
Zach's Pressure Washing LLC is owned by Zach Barker. The climate here does most of the damage: long humid summers, a heavy coat of pine pollen every spring and shade from tall trees keep some walls damp for days after a rain, and that is where mildew and algae settle first.
Vinyl siding and painted trim are washed at low pressure with a cleaning solution, which is what soft washing means. Brick and masonry can take more. The concrete in front of the house is its own job, driveway and concrete cleaning, so list it when you call if it needs doing too.
Last updated: November 2026

At a glance
- Surfaces
- Siding, brick, trim and soffits
- Removes
- Dirt, pollen, mildew and algae
- Method
- Pressure and solution set for each surface
- Price
- Quoted before any work starts
- Where
- Anywhere in Alabama
- Call
- (205) 899-4888
What is soft washing, and which surfaces need it?
Soft washing cleans with a cleaning solution and low pressure instead of a high-pressure blast. The solution does the work on mildew, algae and dirt, and a gentle rinse carries it off, so paint and vinyl come clean without being worn down, chipped or forced apart. It is part of every house wash, not a separate job.
Zach's Pressure Washing LLC carries both methods, because one property often has vinyl siding that needs a soft wash and a driveway that can take full pressure. The method is chosen surface by surface. You can also book a soft wash on its own when one delicate surface is the problem.
| Surface | Method | Why |
|---|---|---|
| Vinyl siding | Soft wash | Pressure can push water behind the overlapping panels |
| Painted trim and doors | Soft wash | Pressure can chip or lift paint |
| Brick | Pressure and solution adjusted | A hard surface, but the mortar joints still need care |
| Wood decks and fences | Pressure set for the wood | Too much pressure raises and splinters the grain |
| Concrete drives and walks | Full pressure | Concrete can take it, and set-in stains need it |
What are the signs your house needs a wash?
The clearest sign is a green or black film on siding the sun doesn't reach. Other signs are dark streaks under gutters and windows, a dull film on painted trim, and pollen dried yellow-green on brick. Each one holds moisture against the house and gets harder to lift the longer it stays.
Green on the north wall isn't shade. It's growth, and it spreads along every wall that stays damp.
-
01
Green film on the shady side
Algae and mildew grow where siding stays damp: north walls, behind shrubs, under big oaks and pines. Humid Alabama summers keep them fed.
-
02
Dark streaks under gutters and sills
Rain running off gutters and window sills carries dirt down the wall and leaves dark tracks on siding and trim.
-
03
Pollen that won't rinse off
Spring pine pollen dries yellow-green on brick and siding. A garden hose moves it around; a proper wash takes it off.
-
04
Red clay along the bottom row
Rain splashes soil and red clay onto the lowest courses of siding and the foundation, and it stains if it sits.
Why hire Zach's for house washing instead of renting a pressure washer?
The difference is the setting: Zach's Pressure Washing LLC adjusts pressure and cleaning solution for vinyl, brick, wood and painted finishes. That lifts growth without forcing water behind siding or stripping paint, the two things a rented machine on one high setting tends to do.
Pressure matched to the wall
Vinyl and painted trim get low pressure and a cleaning solution; brick can take more. Tell Zach what the house is clad in when you call.
The price before the hose comes out
You get the quote first, so the cost is settled before any work begins.
The rest of the outside on one call
Gutters, the driveway, a deck or the family truck can be priced on the same call. See the other services.
What's included in a house wash?
A house wash from Zach's covers the outside walls of the home: siding, brick, trim and soffits, washed to remove dirt, pollen, mildew and algae. Gutters, driveways and decks are separate services, so list them when you ask for a quote and they can be priced at the same time.
- Vinyl and other sidingWashed at low pressure with a cleaning solution.
- BrickDirt, pollen and growth lifted out of the texture.
- Trim and soffitsPainted wood and the undersides of the eaves, where dust and cobwebs collect.
- Mildew and algaeThe green and black film on the walls the sun misses.
- Pollen and dustThe yellow-green layer spring leaves on every surface.
- The spots you point outOlder or delicate surfaces you mention before the job starts.
Gutter cleaning and concrete are quoted as their own services. We clean flat roofs only. Ask about roof cleaning.
How does a house wash with Zach's go, start to finish?
A house wash runs in four steps: you describe the house, you get a price, you clear the walls, and each surface is washed with the right setting. Most of your part happens before wash day, and you usually do not need to be home while the work is done.
-
Describe the house
Call or send the form with the address, what the siding is made of and where the green is worst.
-
Get the price first
You get a quote for the walls you listed before anything goes on the calendar.
-
Clear the walls
Pull planters and patio furniture off the house, mention pets and gates, and point out the outdoor spigot.
-
The wash
Pressure and cleaning solution are set for vinyl, brick or painted trim, and the walls are rinsed clean.
What do homeowners say about Zach's?
Homeowners on Google talk about houses that look better, work that is on time and an owner who listens and adjusts. Zach's Pressure Washing LLC is rated 5.0 on Google from 14 reviews, and every review shown here comes word for word from that profile.
House looks so much better. Does really good work
Dalton TurnerGoogle review · 7 months ago We called Zach to clean a driveway after we installed a fence at a customers house because we tracked mud across the driveway. He was able to get to it the next day and done an awesome job that left me and my customer very happy.
Tyler WakefieldGoogle review · 9 months ago
Read every review on Zach's Google Business Profile, or leave one after your house wash.
Which wash does each part of the house get?
Each surface gets the gentlest wash that gets it clean. Vinyl siding and painted trim get low pressure with a cleaning solution, and brick and masonry can take more. The table shows how each part of a house is usually treated.
| Part of the house | What builds up | How Zach's washes it |
|---|---|---|
| Vinyl siding | Green algae, mildew, road dust | Low pressure with a cleaning solution |
| Brick | Pollen and growth in the texture | Pressure and solution adjusted for masonry |
| Painted trim and soffits | Dust, cobwebs, dull film | Low pressure, careful around paint |
| Wood siding | Mildew and grey weathering | Pressure set for the wood |
What do people ask before a house wash?
People ask about price, whether a wash can hurt siding or paint, how often a house needs it in Alabama and whether they have to be home. The short answers: it is quoted first, the pressure is set per surface, about once a year, and usually not.
How much does house washing cost in Alabama?
The price depends on the size of the house, what the siding is made of and how much growth is on it. Zach's Pressure Washing gives a free, no-obligation quote first, so you know the exact price before any work begins. Call (205) 899-4888 or send the form with your address to start.
Will a house wash damage my siding or paint?
Damage comes from the wrong pressure or technique. Pressure and cleaning solution are adjusted for vinyl, brick, wood and painted finishes, so dirt and growth come off without harming the surface. If the siding is older or the paint is already loose, say so before the wash.
What is the difference between soft washing and pressure washing?
Soft washing cleans with a cleaning solution and low pressure instead of a high-pressure blast. The solution breaks down mildew, algae and dirt, and a gentle rinse carries it off. Zach uses it on vinyl siding and painted finishes, and keeps full pressure for concrete.
How often should I wash my house in Alabama?
Many Alabama homes benefit from a yearly wash, because humidity, pollen, mildew and shade keep building up on the walls. The shaded sides of a house can need it sooner. Zach can suggest a schedule for your property when he quotes it.
Do I need to be home during the house wash?
Usually not. Let Zach know about pets, gates or outdoor items that need moving, and make sure there is an outdoor water spigot. The details are confirmed with you before the job.


